Anybus Wireless Bridge II - Ethernet

Share:


Anybus Wireless Bridge II - Ethernet

Anybus Wireless Bridge II – Ethernet
Anybus® Wireless Bridge enables you create an industrial wireless connection in an industrial Ethernet network. This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and Wireless LAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable. It provides an effective wireless range of up to 400 meters.

BRIDGING TCP/IP ETHERNET
The Wireless Bridge makes it possible to operate leading TCP/IP based industrial Ethernet networks, such as BACnet/IP, PROFINET, EtherNet/IP and Modbus TCP, over Bluetooth and Wireless LAN 2.4 / 5 GHz.

POINT-TO-POINT OR MULTIPOINT
Point-to-point or multipoint Anybus Wireless Bridge is often used as an Ethernet cable replacement (point-to-point communication). But it can also be used as an access point for up to seven Wireless LAN/Bluetooth clients.

FEATURES & BENEFITS
  • Use with point-to-point wireless Industrial Ethernet installations through hazardous or hard- to-reach locations
  • Use as an Access Point for up to seven clients
  • Suitable for AGV’s (Automatic Guided Vehicle)
  • Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n), Robustness (three internal antennas, including MIMO)
  • Eliminates the need for expensive or maintenance-heavy cabling
  • Bridges TCP/IP Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP and PROFINET
  • Max range of up to 400 meters
  • Full compatibility with Anybus Wireless Bolt — a wireless product for machine mounting
  • Easy setup via push button or web interface
  • Advanced configuration with AT commands
  • Compatible with PROFIsafe requirements
  • Rugged IP65 rated industrial design
  • Security features for a secure industrial operation
  • Three built in antennas for higher performance and better robustness
  • Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.
  • CLI (Command Line Interface) for configuration and diagnostics
  • Starterkit available
WIRELESS LAN INTERFACE
  • Wireless standards: WLAN 802.11 a, b, g, n, d.
  • Operation modes: Access point or Client
  • WiFi channels: 2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan.
  • 5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 100-116 + 132-140 and 120-128 depending on regulatory domain scan. (U-NII-1, U-NII-2, U-NII-2e).
  • RF output power: 18 dBm EIRP (including max antenna gain 3dBi)
  • Max number of slaves for access point: 7
  • Power consumption: 54mA@24VDC
  • Net data throughput: 20 Mbps. Link speed: max 130 Mbps (802.11n 2x2 MIMO)
  • Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.
BLUETOOTH INTERFACE
  • Wireless standards (profiles): PAN (PANU & NAP)
  • Operation modes: Access point or Client
  • RF output power: 14 dBm EIRP (including max antenna gain 3dBi)
  • Max number of slaves for access point: 7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~1 Mbps
  • Bluetooth version support: Classic Bluetooth v2.1
  • Security: Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved
BLUETOOTH LOW ENERGY
  • Wireless standards (profiles): GATT
  • Operation modes: Central or Peripheral (pending)
  • RF output power: 10 dBm EIRP (including max antenna gain 3dBi)
  • Max number of simultaneous connections for Central: 7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~200 kbps
  • Bluetooth Low Energy version: 4.0 dual-mode
  • Security: AES-CCM cryptography
ETHERNET INTERFACE
  • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server
  • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
  • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over

Technical specifications
Wired interface
Dimensions (H•W•D)
Ethernet 10/100 Mbit/s
93 x 68 x 33mm
Weight 120g or 0,26 lbs
Operating temperature -30 to +65 °C or -22 to +149 °F (Storage temp: -40 to +85 °C )
Power supply 9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
Power consumption 0.7W idle, 1.7W max
Enclosure material Plastic PC/ABS (Bayblend FR3010)
Wired interface Ethernet 10/100 Mbit/s
Mechanical rating IP65
Mounting Two screws (Ø 4 mm) on flat surface. DIN rail mount option available (optional accessory).
Max range 400 meters
Configuration Three different methods:
  • Accessing the built-in web pages in the product
  • Using Easy Config modes (via push button or inside web interface)
  • Sending AT commands
Connectors 1x M12 for Ethernet (4-pin, D-coded)
1x M12 for Power 5-pin, A-coded)
RP-SMA antenna connector for external antenna
Antennas AWB3000
Three internal antennas:
1. 2.4 GHz
2. 2,4GHz MIMO
3. 5GHz
AWB3010
One external antenna:
1. 2,4/5GHz dual band
  The external antenna does not provide better range, but allows connectivity if the Wireless Bridge needs to be placed inside a radio-secure environment such as a steel cabinet. When mounting inside a steel cabinet antenna cables with magnetic foot or screw mount should also be considered.
CERTIFICATIONS  
Europe ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. 2014/53/EU
Radio Equipment Directive (RED)
USA FCC 47 CFR part 15, subpart B.
UL: Ind. Cont. Eq. also Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D,T4. UL file: E203225
Canada ICES 003
Japan MIC
Other countries Australia, Colombia, Turkey, Malaysia, Peru, Mexico, Argentina.
Brazil, India, Philippines, South Africa, Korea.
WLAN Security WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.
Bluetooth Security Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS
Approved


 Inquiry - Anybus Wireless Bridge II - Ethernet